Raymarine Viewable Marine Displays - Manual (Page 24)

20 Raymarine Sunlight Viewable Marine Displays - Users Guide
OSD menu
The OSD menu enables you to change the appearance of your
on-screen display.
Press and hold the Menu button, the OSD appears.
There are 7 function tabs across the top of the OSD,from left to
right:
• Video input.
• Picture in Picture (PIP).
• Night mode.
• Image adjustment.
• Setup.
• Color.
• Input naming.
Below the tab, the function it controls is named and its sub-menu
is shown.
Navigating the OSD
As a general rule you can navigate through the OSD menu
using the following button presses:
Control name Control tab Sub menu
Menu
1. Press and hold to show the OSD menu.
2. Press the Menu button to move between the
7 tabs. Tabs are highlighted from left to right.
When the last tab is highlighted, the next
press will return to the first tab.
3. Press to move to exit a sub-menu and move
to the tab layer of the menu.
4. Press and hold to exit the OSD menu.
Left/
Right
1. Press either of these buttons to switch
between tabs. You can move backwards and
forwards as required.
2. Press these buttons to toggle a sliding bar for
an attribute in the sub-menu.
Down Press this button to enter the sub-menu of the
highlighted tab.
81277_1.book Page 20 Thursday, August 17, 2006 1:51 PM