Raymarine Viewable Marine Displays - Manual (Page 31)

Operation 27
Set up
The set up tab has a sub-menu that contains 10 options. These
are:
• Language.
• Image size.
• OSD horizontal position.
• OSD vertical position.
• OSD transparency.
• Zoom.
• Pan up/down.
• Pan left/right.
• Factory reset.
• Information.
Language
Enables you to select the language in which the OSD uses. This
can be either English, German, French, Spanish, or Italian.
Use the left and right buttons to toggle to the preferred language.
Press ENT to accept the choice.
Image size
Adjusts main screen size and scaling according to the selected
input source.
You can choose between Fill All, Fill Aspect, and Fill One to
One. Use the left and right buttons switch between the 3 options.
Fill All - stretches the input signal to fill the main screen.
Fill Aspect - the input signal maintains a specific aspect
ration.
Fill One to One - the input signal is not stretched. e.g. if the
input signal is VGA (640 x 480), the video input will appear as a
smaller box because it is only using a 640 x 480 resolution.
OSD horizontal position
Moves the OSD window horizontally.
A sliding bar with settings between 0 - 100 appears. Use the left
and right buttons to increase or decrease the value as
appropriate.
OSD vertical position
Moves the OSD window vertically.
A sliding bar with settings between 0 - 100 appears. Use the left
and right buttons to increase or decrease the value as
appropriate.
81277_1.book Page 27 Thursday, August 17, 2006 1:51 PM