Raymarine Viewable Marine Displays - Manual (Page 32)

28 Raymarine Sunlight Viewable Marine Displays - Users Guide
OSD transparency
Adjusts the transparency of the OSD menu. Use the left and
right buttons to toggle between opaque and translucent.
Zoom
Enables you to zoom in on the main screen, e.g. if you want to
see a video image up close. A sliding bar with settings between
0 - 100 appears.
Use the left and right buttons to increase or decrease the value
as appropriate.
Pan up/down
Used in conjunction with the zoom function, enables you to
move up or down the zoomed image.
A sliding bar with settings between 0 - 100 appears. Use the left
and right buttons to increase or decrease the value as
appropriate.
Pan left/right
Again, used in conjunction with the zoom function, enables you
to move left or right on the zoomed image.
A sliding bar with settings between 0 - 100 appears. Use the left
and right buttons to increase or decrease the value as
appropriate.
Factory reset
Enables all values to be reset to their factory defaults.
Highlight the option and press ENT for this to take effect.
Information
Enables you to see some of the technical data of the displayed
image, such as horizontal and vertical image resolution.
Highlight the option and press ENT to view the data.
Color
The color tab has 4 options in the sub-menu:
• Color temperature.
• Red.
• Green.
• Blue.
Color temperature
Enables you to adjust the color temperature of the picture.
There is a choice of 3 settings, 6500K, 9300K, and User. The
6500K setting makes the picture reddish white. The 9300K
setting makes the picture bluish white. The User setting enables
you to manually set values for red, green and blue.
Use the left and right buttons to make your selection, changes
occur as the buttons are pressed.
81277_1.book Page 28 Thursday, August 17, 2006 1:51 PM