Rabbit Air MinusA2 SPA-780A - Manual (Page 7)

7. Pull out the Activated
Carbon Filter and discard
plastic wrapping.
6. Remove the Customized Filter from the black frame to discard plastic wrapping.
Return the filter to its frame. Make sure the front of the filter is facing up. See
Customized Filter chart, below, to identify the front of your filter.
Know your Customized Filter!
Toxin Absorber Customized Filter:
Pet Allergy Customized Filter:
Germ defense Customized Filter:
Odor Remover Customized Filter:
Front color: Purple
Back color: Black
Front color: Purple & Orange
Back color: Orange
Front color: Purple & Yellow
Back color: Yellow
Front color: Black (thicker fabric like material)
Back color: Black
Back Front
10. Reattach the front panel by
latching the top hooks, then
securing the bottom of the panel.
8. Return the filters to the filter case in the
following order from back to front:
Activated Carbon Filter,
Customized Filter,
BioGS HEPA Filter,
Medium Filter,
Pre-Filter.
(See diagram on page 9).
9. Return filter case to the unit. Slide the
bottom of the case back into the unit (1),
then press the top in (2).
Finishing up!
11 12