Coin-in – Ruby Tech PM0426-13 User Manual

Page 13

Advertising
background image

COPYRIGHT © 2005 MERIT INDUSTRIES, INC.

Coin-In

NOTE: The Coin-In Menu instructions on the current page apply to select markets
only. For typical markets, the appropriate guidelines for operation will be
found on the following page.

To Enter The “Coin-In” Screen, Touch “Coin-In” on the Credits Menu

Game cost can be controlled two ways: by changing the number of credits required to play

a game or by changing the cost of a credit. The Coin-In Menu allows you to adjust the cost

of a credit, as well as provide a way to give players “bonus” credits for depositing a higher

amount of money.

When programming the Coin-In Menu, Channel 1 is set for the lowest value coin, Channel 2

for the next highest value, etc. If all six coin inputs are not used, the unused inputs must be

set to “N/A”. Adjust the coin/credit/meter pulse settings by touching the up and down

arrows on the field you want to change.

COIN INPUT

COIN VALUE

COINS

=

CREDITS

&

METER PULSES

1A

10p

3

1

3

2B

20p

3

2

6

3C

50p

1

2

player premium 25p/credit

5

4D

1

5

player premium 20p/credit

10

In the above example (UK currency), each game costs one (1) credit and the cost for a

single credit is 30p. This method is preferred if you want game cost to always be reflected

as “1 credit.”

COIN INPUT

COIN VALUE

COINS

=

CREDITS

&

METER PULSES

1A

10p

1

1

1

2B

20p

1

2

2

3C

50p

1

6

1 bonus credit

5

4D

1

15

5 bonus credits

10

In the above example (UK currency), the cost of a credit is set to 10p and each game costs

3 credits (for a total of 30p). This method allows game cost to be increased by the smallest

unit of currency used (e.g. increasing the cost of Solitaire to four (4) credits would increase

the game cost by 10p).

In both examples, note that meter pulses are independent of credits and only track the unit

of currency (10p in the examples). Players are given an incentive to deposit more money

by giving them “bonus” credits for depositing 50p or £1. Coins may be deposited in any

combination of values and the game will automatically register the highest number of credits

for the total amount of coins deposited. Once a game is played, any remaining fractional

credits are erased.

Generally, most countries have a factory default setting. This setting can be adjusted (as

described above), but will return if the game memory is cleared. Some programs, depending

on the key used, have a currency default display located to the left of the coin inputs. It

shows the currency value for each of the coin inputs. This display is used as a guide and

iis not used in any calculations. Touch the currency default display to hide/show the display.

PM0426-13 MEGATOUCH EVO ION OWNER’S MANUAL 10

Advertising