Ruby Tech PM0426-13 - Manual (Page 33)

COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
FIGURE 27 - PROFILE OF COIN MECH BRACKET
Coin Mech Position- EVOs with Coin Mechs Only
If you remove the coin mech for any reason, you must replace it in the correct
notches in the coin mech bracket so that the mech remains vertical. If your
game is sitting on a table or bar top, make sure the tabs on the coin mech are in
the notches labeled “BAR MOUNT” below. If your EVO is mounted on a wall (with
or without the use of the swivel bracket), make sure the tabs on the coin mech
are in the notches labeled “WALL MOUNT” below.
BAR
MOUNT
WALL
MOUNT
PM0426-13 MEGATOUCH EVO ION OWNER’S MANUAL 30