Roadmaster VR3 VR500CS-BT - Manual (Page 17)

CD Operation
(Cont)
cally switch to Radio Mode.
2. Multi-Session CD Reading
This unit can read multi-session CDs.
The multi-session reading will be activated
automatically if the player detects a file that
is written in multi-session format. Press and
hold the Volume Knob until “DSP OFF” is
shown on the LCD, then press the Volume
Knob to cycle through the menu selections
until “MULT OFF” is shown. Use the Vol-
ume Knob to choose “MULT ON” or “MULT
OFF”. The default is MULT OFF.
3. Selecting Tracks
On the Remote or Head Unit, press the >>|
Button to advance CD to the next track.
Track numbers will be shown on the display.
Press and hold >>| Button to fast forward.
Press the |<< Button to go to a previous
track. Track numbers will be shown on the
display. Press and hold the |<< Button to
fast reverse. Disc will play normally when
the >>| or |<< Button is released.
4. Play/Pause CD
On the Remote or Head Unit, press the
BND•ID3/>|| Button to pause the CD. Press
these buttons again to resume playback.
5. Resume All Tracks
On the Remote or Head Unit, press the
1/TOP Button to play the all the tracks
again. The first song on the CD will be
played.
6. Scanning Tracks
On the Remote or Head Unit, press the
INT/2 Button to play the first 10 seconds of
each track. Press this button again to re-
sume playback.
7. Repeat
On the Remote or Head Unit, press the
FPS/RPT Button to repeat the same track
continuously. “RPT ON” will appear on the
display. Press this button again to cancel
the repeat function.
8. Random
On the Remote or Head Unit, press the
RDM/4 Button to play all the tracks in ran-
dom order. “RDM ON” will appear on the
display. Press this button again to stop ran-
dom play.
MP3/WMA on CD
1. Insert/Eject CD
Insert a disc with MP3 and/or WMA files into
the CD slot with label side up. The disc will
be automatically loaded into the unit, even
when the unit is off or in Radio Mode. The
word “MP3 DISC” will be displayed as the
CD is loaded. The first file in the root folder
will be played. As the file is playing, “ROOT”
will be displayed first, then if there is any ID3
information available, it will be displayed as
the file is playing. Press the EJECT Button
to eject the disc from the slot. If the disc
is not removed from the slot within 5 sec-
onds, it will automatically be loaded into the
slot again. When the disc is ejected and re-
moved, the unit will automatically switch to
Radio Mode.
2. Multi-Session CD Reading
This unit reads multi-session CDs.
The multi-session reading will be activated
automatically if the player detects a file that
is written in multi-session format. Press and
hold the Volume Knob until “DSP OFF” is
shown on the LCD, then press the Volume
Knob to cycle through the menu selections
until “MULT OFF” is shown. Use the Vol-
ume Knob to choose “MULT ON” or “MULT
OFF”. The default is MULT OFF .
3. Selecting Tracks
Remote or Head Unit, press the >>| But-
ton to advance CD to the next track. Track
numbers will be shown on the display. Press
and hold >>| to fast forward.
16