Roadmaster VR3 VR500CS-BT - Manual (Page 18)

Press the |<< Button to go to a previous
track. Track numbers will be shown on the
display. Press and hold the |<< Button to
fast reverse. Disc will play normally when
the >>| or |<< Button is released.
4. Play/ Pause CD
On the Remote or Head Unit, press the
“BND•ID3” button to pause the CD. Press
this button again to resume playback.
5. Resume All Tracks
On the Remote or Head Unit, press the
1/TOP Button to play the all the tracks
again. The first song on the CD will be
played.
6. Scanning Tracks
On the Remote or Head Unit, press the
2/INT Button to play the first 10 seconds
of each track. Press this button again to
resume playback.
7. Repeat
On the Remote or Head Unit, press the
F/PS/RPT Button to repeat the same
track continuously. “RPT ON” will appear
on the display. Press this button again to
stop repeating tracks
8. Random
On the Remote or Head Unit, press the
4/RDM Button to play all the tracks in ran-
dom order. “RDM ON” will appear on the
display. Press this button again to stop
random play.
9. UP 10
Press the 6/UP10 Button to advance 10
tracks at a time.
10. DN 10
Press the 5/DN10 Button to go back 10
tracks at a time.
USB Flash Memory
To play MP3/WMA files from a USB flash
memory, insert a USB flash memory into the
USB port on the left side of the unit. The
unit will start playing MP3/WMA files on the
USB flash memory automatically. Or press
the MODE Button to select USB after press-
ing POWER Button to turn on the unit.
SD/MMC Card
To play MP3/WMA files from a SD/MMC
Card, insert a SD/MMC Card into the SD
Card Slot on the left side of the unit. The
unit will start playing MP3/WMA files on the
SD/MMC Card memory automatically. Or
press the MODE Button to select SD/MMC
Card after pressing POWER Button to turn
on the unit.
1. Play / Pause
When playing MP3/WMA in the USB drive,
press the “BND-ID3” Button to pause play-
back. Press the Button again to restore.
2. Selecting Tracks
If the MP3/WMA files are stored in folders on
the USB drive or SD Card, the unit will start
by playing the first song in the first folder.
After playing all the files sequentially in the
first folder, the unit will play sequentially all
of the files in the next folder. The unit will
continue playing through all of the folders
on the USB drive or SD Card in this manner.
If the USB drive or SD Card has loose files
and folders containing files, it will play the
loose files sequentially, then it will play the
files in the folders sequentially.
The 5/DN10 and 6/UP10 Buttons are used
to advance ten tracks at a time or go back
ten tracks at a time.
3. Resume All Tracks
On the Remote or Head Unit, press the
1/TOP Button to play the all the tracks
again. The first song on the CD will be
played.
USB/SD/MMC Card Operation
17