RCA HD Receiver - Manual (Page 13)

Setup and Connections
11
To make the connection:
1. Connect Audio/Video and S-Video cables.
• Connect an Audio/Video cable from the HD receiver’s AUDIO Right, and Left, and VIDEO jacks to the AUDIO IN Right,
Left, and VIDEO jacks on the Multimedia or HD monitor.
• Connect an Audio cable from the HD receiver’s AUDIO Right and Left jacks to the Multimedia VGA Left and Right
Audio inputs.
• Connect an S-Video cable from the HD receiver’s S-VIDEO jack to the Multimedia or HD monitor’s S-VIDEO jack.
2. Connect the VGA cable.
• Connect a VGA cable from the HD receiver’s HD MONITOR OUT jack to the Multimedia or HD monitor’s VGA input
jack, usually labeled DIGITAL TV INPUT (S)VGA.
3. Connect coaxial cables.
• Connect a coaxial cable from the ANTENNA A (or B) jack on the HD receiver to your cable outlet, box, or antenna. If
desired, connect another coaxial cable from the vacant ANTENNA jack on the HD receiver to another RF signal.
• Connect a coaxial cable from your HD receiver’s SATELLITE IN jack to the satellite dish antenna.
• Connect a coaxial cable from the HD receiver’s OUT TO TV jack to the TV’s input jack, often labeled ANTENNA/CABLE.
Basic Connection Using a Multimedia or HD Monitor
HD Receiver and Multimedia or HD Monitor
CAUTION
Do not stack electronic
components or other
objects on top of the HD
receiver. See Safety
Information on the inside
cover for details.
Due to copyright
restrictions, you may not
be able to view some
high definition programs
in high definition format
using this product.
MULTIMEDIA or HIGH DEFINITION MONITOR
VIDEO S-VIDEO R L
AUDIO
ANTENNA/
CABLE
INPUT
INPUT
INPUT
DIGITAL TV INPUT (5)VGA 1
AUDIO INPUTS R L
HD RECEIVER
ANTENNA B IN ANTENNA A IN OUT TO TV
VIDEO S-VIDEO HD MONITOR OUT AUDIO VCR CONTROL
DIGITAL AUDIO OUTPUT
PHONE JACK SATELLITE IN
ACCESS CARD
R
R
L
L
SATELLITE DISH ANTENNA ALTERNATE RF SIGNAL
CABLE
The ANT B and ANT A
jacks can receive both
digital and analog RF
signals.