RCA HD Receiver - Manual (Page 31)

BASIC OPERATION
29
Changing Between DIRECTV and TV
Viewing
When you change channels, you tune to programming that can come from either
TV inputs (Antenna A or B) or from the satellite input (if you subscribe to DIRECTV
®
programming). You can select one of these sources by pressing INPUT on the remote
control to choose whether you want to view TV or DIRECTV programming. Then
you can enter the channel numbers.
When viewing DIRECTV ® programming:
You tune to channels that come from DIRECTV (if you subscribe to DIRECTV ®
programming). Press INPUT until the DIRECTV icon is highlighted in the channel banner.
Enter channel numbers that are three or four digits long. If the channel is three digits,
you will need to press OK to tune.
When viewing TV programming:
You tune to channels that carry the terrestrial off-air or cable TV signal. Press INPUT until
the TV icon is highlighted in the channel banner. Then:
• To tune to an analog channel, enter channel numbers that are up to three digits long.
Press OK to tune. Since analog channels don’t have subchannels, you don’t need to
enter a subchannel number.
• To tune to a digital channel, enter channel numbers that are one, two, or three digits
long. If necessary, press the right arrow and enter a subchannel number. These
numbers appear in the box to the right of the primary channel number. Press OK to
tune.
1 2 3
4 5 6
7 8 9
0
GUIDE INFO
MENU CLEAR
INPUT
REVERSE PLAY FORWARD
ANTENNA
OK
Right arrow button
INPUT button
Subchannel
(if necessary) Primary
Channel
The TV icon is highlighted when
viewing TV programming; the
DIRECTV icon is highlighted when
viewing DIRECTV programming.