Stopping a timer recording, Reviewing and clearing programs, Recording broadcast stereo tv or sap – RCA VR646HF User Manual
Page 34: Second audio program), Recording
32
RECORDING
Stopping a Timer Recording
To stop or cancel a timer recording in progress (even an
express recording):
•
Press and hold the STOP button for three seconds.
Reviewing and Clearing Programs
To review programs that you have already set up:
1.
Press 2 when the VCR MAIN MENU is displayed to display
the TIMER RECORDINGS menu.
TIMER RECORDINGS
1 Create a New Program
2 Review Existing Progs.
3 Use VCR Plus+ Code
0 Exit
2.
Press 2 to display the Review Existing Progs. screen.
Program 1 (One Time)
Channel 104 Cable
Start Time 08:00 PM
End Time 09:30 PM
Start Date 11/18/99 Thu
Tape Speed SLP
Press CLEAR to erase
Press MENU for next prog
3.
Press CLEAR to erase or MENU to see the next program.
Recording Broadcast Stereo TV Or SAP
(Second Audio Program)
Some TV programs are broadcast with stereo audio or SAP
(Second Audio Program).
1.
Turn on the TV and tune it to the VCR viewing channel
(either 3, 4, or TV’s video input).
2.
Insert a tape with safety tab in place.
3.
If your VCR viewing channel is 3 or 4, make sure the VCR
indicator appears in the VCR’s display panel. If not, press
TV•VCR to turn it on.
4.
Use the SPEED button on the remote to select a recording
speed. The tape speed indicator appears on the TV screen.