Rolodex 192K RF-22192 - Manual (Page 27)

Transmitting or Receiving Records
Connecting the Serial Cable
The following steps must be followed before
you can transmit or receive records.
1. With your personal com-
puter turned off, connect the
9-pin plug of the Organizer PC
Link cable into a communica-
tions port.
2. Connect the single-pin plug
of the cable into the
PC PORT
hole on the left side of your
organizer.
Configuring the Organizer Software
1. Turn on the Organizer PC Link software
on your personal computer.
2. Select Databank Model from the Options
menu.
3. On the Model Setup window, select Se-
ries L.
4. Click OK.
5. Select Serial Port from the Options menu.
6. On the Serial Port Setup window, select
the COM port into which you plugged the
Organizer PC Link cable.
26