Using tone services on a pulse line, Using page/intercom – Radio Shack Dual Keypad User Manual
Page 16
16
Operation
• The redial memory holds up to 32 digits,
so you can redial any long-distance
number as well as local numbers.
• The redial memory also holds pause
entries (see “Entering a Pause” on
Page 19).
USING TONE SERVICES ON
A PULSE LINE
Some special services, such as bank-by-
phone, require tone signals. If you have
pulse service, you can still use these special
tone services.
Dial the service’s main number. When the
service answers, press
TONE
/
*
. Any addi-
tional numbers you dial are sent as tone sig-
nals.
When you hang up, the phone automatically
resets to pulse dialing.
USING PAGE/INTERCOM
You can use the phone as a two-way pager
and intercom between the base and the
handset. This is useful if the handset is away
from the base and you want to locate it, or if
you want to converse with someone through
the intercom.
To page the base from the handset, press
SELECT/INTCM
. The base and handset ring.
FW]_d]
FW]_d]
FW]_d]
FW]_d]
appears on the base's display and
FW]_d]
FW]_d]
FW]_d]
FW]_d]
8Wi[
8Wi[
8Wi[
8Wi[
appears on the handset's display.
Press
SPEAKER
or
INTCM
on the base to an-
swer the page. Both displays change to
?dj[h#
?dj[h#
?dj[h#
?dj[h#
Yec
Yec
Yec
Yec
.
To page the handset from the base, press
IN-
TCM
. The handset and base ring.
FW]_d]
FW]_d]
FW]_d]
FW]_d]
>WdZi[j
>WdZi[j
>WdZi[j
>WdZi[j
appears on the base's display and
FW]_d]
FW]_d]
FW]_d]
FW]_d]
appears on the handset's display.
Press
TALK
or
SELECT/INTCM
on the hand-
set to answer the page. Both displays
change to
?dj[hYec
?dj[hYec
?dj[hYec
?dj[hYec
.
In either case, if the called party does not an-
swer within 1 minute, the paging stops.
Press
SELECT/INTCM
or
INTCM
again to re-
start paging.
To end an intercom call, press
TALK
on the
handset, press
SPEAKER
on the base, or
hang up the handset.
If a call comes in during an intercom conver-
sation, only the base rings (even if it is set to
Ringer Off), but the person at the handset
can also hear the ring through the intercom.
Either person can answer the call by press-
ing
TALK
or
SPEAKER
once to end the inter-
com call, then pressing
TALK
or
SPEAKER
again to answer the call.
Note: The intercom does not operate if the
party being paged is already on a call.
TRANSFERRING A CALL
BETWEEN THE HANDSET
AND THE BASE
You can use the phone's intercom feature to
transfer a call between the handset and the
base for a three-way conversation.
To transfer a call from the handset to the
base, press
SELECT/INTCM
. The call is
placed on hold, CHARGE/IN USE blinks and
>ebZ
>ebZ
>ebZ
>ebZ
and
FW]_d]
FW]_d]
FW]_d]
FW]_d]
appear at the base, and
>ebZ
>ebZ
>ebZ
>ebZ
and
FW]_d]
FW]_d]
FW]_d]
FW]_d]
8Wi[
8Wi[
8Wi[
8Wi[
appear on the handset's dis-
play. When the person at the base answers
and the display changes to
>ebZ
>ebZ
>ebZ
>ebZ
and
????dj[hYec
dj[hYec
dj[hYec
dj[hYec
,
press
TALK
. The call is released from hold
and transferred to the base. To bring the
handset back into the conversation for a
three-way conference, press
TALK
again.
To transfer a call from the base to the hand-
set, press
INTCM
. The call is placed on hold,
CHARGE/IN USE blinks and
>ebZ
>ebZ
>ebZ
>ebZ
and
FW]_d]
FW]_d]
FW]_d]
FW]_d]
>WdZi[j
>WdZi[j
>WdZi[j
>WdZi[j
appear at the base, and
>ebZ
>ebZ
>ebZ
>ebZ
and
FW]_d]
FW]_d]
FW]_d]
FW]_d]
appear on the handset’s display.
When the person with the handset answers
and the display changes to
>ebZ
>ebZ
>ebZ
>ebZ
and
?dj[hYec
?dj[hYec
?dj[hYec
?dj[hYec
,