Canon IXUS 60 - Manual (Page 64)

62
The default setting for color swap mode changes green into
white.
You may not obtain the expected results if you use the
flash.
The colors specified in the color swap mode are retained
even if the camera's power is turned off.
3
.
The camera will switch to color input
mode and the display will alternate
between the original image and the
color swap image (using the previ-
ously set color).
4
Aim the camera so that the original color
appears at the center of the LCD monitor
and press the button.
Only one color can be specified.
You can use the
or button to specify the range of col-
ors that are swapped.
• -5: Only takes the color that you want to swap
• +5: Also takes colors close to the one that you want to
swap
5
Aim the camera so that the desired color
appears at the center of the LCD monitor
and press the button.
• Only one color can be specified.
6
Press to complete the setting, then
shoot.