Canon IXUS 60 - Manual (Page 97)

95
T
roub
le
s
h
o
o
tin
g
LCD monitor
The display darkens.
The image in the LCD
monitor will darken in
strong sunlight or bright
light. This is a normal occurrence in
devices containing CCDs and does
not constitute a malfunction. (This
image will not be recorded when
shooting still images, but it will be
recorded when shooting movies.)
Display flickers.
Display flickers when
shot under fluorescent
lighting. This is not a camera malfunction
(flickering recorded in movies, but
not in still images).
A bar of light (red, purple) appears on the LCD monitor.
Subject is too bright. This is a normal occurrence in
devices containing CCDs and does
not constitute a malfunction. This
bar of light will not be recorded when
shooting still images, but it will be
recorded when shooting movies.
appears.
A slow shutter speed has
likely been selected
because of insufficient
lighting. Raise the ISO speed (p. 64) or set
the flash to any setting other than
( flash off), or secure the camera
to something, such as a tripod
(Basic Guide p. 9).
appears.
This displays when using
a memory card that has
print settings, transfer
settings or slide show
image selections set by
other DPOF-compliant
cameras. These settings will be overwritten by
those set by your camera (p. 85) .