Orion HP-4600 - Manual (Page 18)

17
© 2006 Directed Electronics, all rights reserved
Speaker Connections HP-4600
The Orion HP-4600 amplifier offer four positive and four negative output terminals for ease
of connecting channel 1, 2, 3, and 4 outputs to the speakers. The amplifier is stable to 2W.
See diagrams below.
Four Channel Stereo Configuration
● Channel 1/2 and channel 3/4 lowest recommended impedance is 2W stereo.
● Crossover mode, output, and gain configurations are independently adjustable
between the front and rear channels.
● Two-channel or four-channel input can be used for this configuration. For source
unit fading, use the four-channel input mode.
● Channels 1/2 and channels 3/4 outputs can be individually configured for high-
pass, low-pass, or full range operation.
SPEAKER
+
1CH
+
2CH
-
1CH
-
2CH
BRIDGE
SPEAKER
+
3CH
+
4CH
-
3CH
-
4CH
BRIDGE
CHANNEL 2 CHANNEL 1 CHANNEL 4 CHANNEL 3