Orion HP-4600 - Manual (Page 20)

Tri-Mode Six Channel Configuration
● Lowest recommended impedance is 2W stereo and 4W bridged mono.
● Front and rear outputs must be set for full range operation.
● Passive crossovers must be used on all components and frequencies must not overlap.
WARNING! Failure to observe these requirements may result in damage to the amplifier.
SPEAKER
+
1CH
+
2CH
-
1CH
-
2CH
BRIDGE
SPEAKER
+
3CH
+
4CH
-
3CH
-
4CH
BRIDGE
19
© 2006 Directed Electronics, all rights reserved