Basic operation, During standby, Answering an incoming call – Oricom ECO5100 User Manual
Page 12
BASIC OPERATION
9
Basic Operation
During standby
During standby
Note:
If the power is not connected to the base unit.
The cordless handset
CANNOT
operate.
Cordless handset's LCD display
HANDSET 1 : Handset number
: Current battery level
:
A constant signal icon indicates the
cordless handset is linked to the base unit. When signal icon is fl ash-
ing the handset needs to be re-registered (see page 23).
Answering an incoming call
Answering an incoming call
When there is an incoming call, the phone rings and flashes on the display. If a CID
record is received,
flashes and the caller information is displayed. The auto answer
function allows you to answer a call by simply lifting the handset from the base when it
is ringing.
1
. Press
key to answer the call if hansdet is off the base.
2
. Press
key again to end the call.
HANDSET