Oricom ECO5100 - Manual (Page 13)

10
BASIC OPERATION
Making an external call Making an external call
Normal dialling
1
. Press key.
2
. Enter a telephone number. If you enter more than 14 digits, you only see the last
14 digits on the display.
3
. Press key to end the call.
Pre-dialling
1
. Enter a telephone number.
2
. When necessary, press to erase the digit individually.
3
. Press key to dial.
4
. Press key to end the call.
Mute feature Mute feature
Place a call on hold so that the caller will NOT be able to hear you but you can still hear
the caller.
During talking mode,
1
. Press key on the handset to mute the call, is shown on the display.
2
. Press key again to resume the call.
Paging the handset/s Paging the handset/s
All handsets registered to the base will ring for a maximum of 20 seconds when the
button on the base is pressed.To stop the paging ring, just press any button on
a handset.