Oricom ECO5100 - Manual (Page 31)

28
ANSWERING MACHINE OPERATION
2
. Press or MEMO key to select a new fi rst digit and press CODE button to
confi rm. You will hear the second digit, eg: 2.
3
. Press or MEMO key to select a new second digit and press the CODE but-
ton to confi rm. You will hear the third digit, eg: 3.
4
. Press or MEMO key to select a new third digit.
5
. Press CODE key to confi rm setting and the new security code will be heard,
then the answering machine will return to standby mode.
Note: Press key any time or 5 seconds without any operation will quit setting
mode and will go back to standby or off mode. All settings will remain un-
changed.
OGM (Outgoing Messages) OGM (Outgoing Messages)
eco5100 has two OGM message modes:
OGM1 (Announcement One) mode:
Callers can hear a pre-recorded message “ Please leave a message after the beep ”
and the unit records the caller's message.
OGM2 (Announcement Two) mode:
Callers can hear the other pre-recorded message “ Please call later ”. Under this mode,
the caller will NOT have the opportunity to leave a message.
You can also record your own personalized greeting (from 3 seconds to 120 seconds).
Note: The default setting is OGM1 (Announcement One).
OGM setting
Press key to switch between OGM1 and OGM2.
Record OGM
1
. Press key to select OGM1 mode or OGM2 mode.