Output Solutions C I - 8 0 6 0 - Manual (Page 190)

Appendix D IBM ProPrinter Quick Refernce
D-7
Table 4 (Cont.): Horizontal Form Handling and Printing Modes
Escape Sequence Mnemonic Function
ESC T Cancel Superscript/Subscript
ESC U P1 Cancel / Select Unidirectional Printing
P1 = 0/0 or 0 : cancel Unidirectional
P1 = 0/1 or 1 : select Unidirectional
ESC W P1 Cancel / Select Double Width
P1 = 0/0 or 0 : cancel Double Width
P1 = 0/1 or 1 : select Double Width
ESC X P1 P2 Set Left and Right Margins
P1 : Left Margin
P2 : Right Margin (Pn = 0/0...F/F)
ESC d P1 P2 Set Relative Horizontal Dot Position
(P1 + P2 x 256)/120" (Pn = 0/0...F/F)
ESC < Home Position of Printhead (left margin)
ESC ; Set Left Margin at Current Position
ESC [ P1 SP r SPQ Select Print Quality LQ / NLQ
Native Command P1 = 0 : LQ
P1 = 1 : NLQ; this is only valid if the
NLQ type style is available.
P1 = 2 : Draft
P1 = 3 : HSD (High Speed Draft)
Note: The LQ / NLQ selection becomes active
if a LQ-/NLQ-font is selected.
Draft / HSD becomes active if type style
DATA is selected.