Output Solutions C I - 8 0 6 0 - Manual (Page 63)

Configuring the Printer
Selection Parameter / Value
3-16
DSR / CTS MODE IGNOR. DSR+CTS r
DSR+CTS ACTIVE
CTS ACTIVE
DSR ACTIVE
BUFFER 64 KBYTE r
32 KBYTE
8 KBYTE
1 KBYTE
) Only indicated if the serial (RS232 or RS422) interface is selected. 1
3.5.19 Language
Entry Point = INSTALLATION
Selection VALUE
LANGUAGE ENGLISH r
DEUTSCH
FRANCAIS
3.5.20 Recall Factory
Entry Point = INSTALLATION
Selection Function
RECALL FACTORY All standard default settings of the firmware will be
restored but not saved.