Start position of barcode printing – Output Solutions C I - 8 0 6 0 User Manual
Page 235
Appendix F Barcode Quick Reference
F-4
P Ratio Width to Thin (default: 0 (2 to 1))
6
P
2 of 5 industrial
EAN 13
6
value
Codabar
UPC-E
Code 39
EAN 8
2 of 5 interleaved
UPC-A
Code 93
MSI mod 10/10
Code 128
0
2.0 to 1
SC3
1
2.5 to 1
SC6
2
3.0 to 1
SC9
3
3.5 to 1
SC3
Note:
Code 93, MSI 10/10, Code 128 are fixed 2.0 to 1
Best results for Code 39, 2 of 5 industrial, 2 of 5 interleaved, and Codabar
with 2.5 to 1
P
Uni-directional or bi-directional printing - standard 0 uni-directional
7
values are:
0 or not programmed means no changes
1 uni-directional printing in LQ
2 bi-directional printing in LQ
3 uni-directional printing in NLQ
4 bi-directional printing in NLQ
Note:
A switch from uni-directional to bi-directional printing is only possible if the
parameter UNI-DIRECT.CMD is set to YES via operator panel or
ESC-sequence.
Start Position of Barcode Printing
The start position for barcode printing is the current print position.
For both horizontal and vertical printing, the print position after printing barcodes
is the same line as the start position next to the barcode printed.