Oki MICROLINE 320 TURBO - Manual (Page 43)

|
User’s Guide: English 43
Press LF / Micro Feed Down to decrease the space (move
Top of Form higher). The paper moves down.
Press FF/LOAD / Micro Feed Up to increase the space
(move Top of Form lower). The paper moves up.
32T-FP.eps
QUIET PARK TEAR FF/LOAD LF SEL
SEL
POWER ALARM MENU
GROUP EXIT ITEM SET PRINT
MENU SHIFT TOF Micro Feed
Up
Micro Feed
Down
! The first line prints at the red line of the plastic paper
shield (7) on the printhead.
32T-18.eps
4 Keep holding SHIFT and press QUIET/TOF a few times to
set the Top of Form.
5 When Top of Form is at the correct position, release all
keys.
6 Press SEL/MENU to place the printer on line.
! If you turn the platen knob when the printer is turned
on, you will cause the Top of Form to mis-align. Always
turn the printer off before turning the platen knob!
! For information on resetting the Top of Form to the
factory default, refer to “Using Your Printer, Top of
Form, Reset Top of Form to Factory Default.”
1
6
4
2 3 5
7