Auto cr, Auto lf (line feed), Auto select – Oki MICROLINE 320 TURBO User Manual
Page 68: Centering, Code del, 7 bit, 8 bit, Print del code, Print suppress, Reset
68
Microline 320/321 Turbo
|
Menu Settings Table (Continued)
For a complete explanation of each menu item, refer to “Using Your Printer, Menu Mode, Explanations of Menu Items.”
The table below shows the items which may appear in the menu. Settings which are engaged at the factory (defaults) are set in
bold italic. Some groups or entries will only appear when a specific emulation is engaged, as noted.
Group
Item
Settings (Defaults are set in bold italic)
Set-Up
7 or 8 Bits Data Word*
8, 7
(continued)
Operator Panel Function
Full Operation, Limited Operation
Reset Inhibit
No, Yes
Print Suppress Effective
Yes, No
Auto LF
No, Yes
Auto CR+
No, Yes
Print DEL Code*
No, Yes
SI Select Pitch (10 cpi)+
17.1 cpi, 15 cpi
SI Select Pitch (12 cpi)+
20 cpi, 12 cpi
Time Out Print
Valid, Invalid
Auto Select
No, Yes
Centering Position
DEFAULT, MODE 1, MODE 2
ESC SI Pitch
17.1 cpi, 20 cpi
* Appears only when the MICROLINE Standard emulation is selected.
+ Appears only when the IBM emulation is selected.