Sylvania SRPD442 - Manual (Page 7)

7
I
NSERTING THE REMOTE CONTROL BATTERIES
1 Remove the back cover of the remote control
while pressing the tab on the back cover down
with your finger.
2
Insert two AA size batteries, making sure that
the polarities of the batteries match the sym-
bols inside the remote control.
3 Replace the back cover of the remote control.
NOTE
• Do not insert a mix of old and new batteries.
• Do not insert a mix of different brands of batteries,
or different types of batteries.
• Always use new, fresh batteries as replacement.
• Never attempt to charge, heat, burn, or take apart
batteries.
R
EMOTE CONTROL RANGE
Operate the remote control within a 30 degree angle on both sides of the infrared sensor on the main
unit. You can operate the remote control from a distance of several yards away from the main unit.
NOTE
Other devices which use infrared beams, sunlight, fluorescent lights, etc., may affect the range and effectiveness
of the remote control. Make sure the plasma display is positioned in a place which minimizes interference from
them.
POWER
INPUT SELECT
DISPLAY
MENU PREVIOUS
SLEEP
VOL
MUTE SCREEN MODE
STILL
With in 30 degrees With in 30 degrees
Approximately
7.6 yds (7 m)
Approximately 5.5 yds (5 m) Approximately 5.5 yds (5 m)
VOLUME INPUT SELECT STANDBY ON POWER
SUPPLIED A
CCESSORIES / INSER
TING
THE REMO
TE CONTR
OL B
A
TTERIES / REMO
TE CONTR
OL RANGE