Sylvania SRPD442 - Manual (Page 8)

8
C
OMPONENT NAMES
1
POWER button: Turns the power ON or
STANDBY.
2
ON indicator: Lights up when the power is
ON.
3
STANDBY indicator: Lights up when the
power is in the standby mode. Disappears
when the power is ON.
4
INPUT SELECT button: Selects input termi-
nals.
5
VOLUME K (up) / L (down) button:
Increases or decreases the volume.
6
AC IN terminal: Connect the supplied power
cable for a standard AC outlet.
7
AUDIO OUT: Output terminals for audio.
8
AUDIO/VIDEO/S-VIDEO: Input terminals for
an audio and video signal. You can select
either VIDEO or S-VIDEO.
9
COMPONENT: Input terminals for a compo-
nent signal. You can make a Y-Cb-Cr inter-
laced connection to component 1 or Y-Pb-Pr
progressive or interlaced connection to com-
ponent 2.
MAIN UNIT
VOLUME INPUT SELECT
STANDBY ON POWER
VOLUME INPUT SELECT
STANDBY ON POWER
1
2
3
4
Infrared Sensor
5
Input Terminals
Input Terminals
R L Y C b C r
R L Y P b P r
AU D I O
COMPONENT 1
COMPONENT 2
VIDEO1 AUDIO S-VIDEO1
L R
R
L
AUDIO OUT A C I N
AUDIO
VIDEO2
S-VIDEO2
R
L
6 7 8 9
8
Front Rear Figure 2 Figure 3