Oricom eco5200 Series - Manual (Page 13)

BASIC OPERATION
9
Basic Operation
During standby During standby
Cordless handset's LCD display
HANDSET 1 : Handset number
: Current battery level
: A constant signal icon indicates the
cordless handset is linked to the base unit. When signal icon is
fl ashing the handset needs to be re-registered (see page 23).
Answering an incoming call Answering an incoming call
With cordless handset
When there is an incoming call, the phone rings and fl ashes on the display. If a CID
record is received,
fl ashes and the caller information is displayed. The auto answer
function allows you to answer a call by simply lifting the handset from the base when it
is ringing.
1
. Press key to answer the call if hansdet is off the base.
2
. Press key again to end the call.
HANDSET
Note: If the power is not connected to the base unit.
The cordless handset CANNOT operate.
With base unit
When there is an incoming call,
1
. Press key to answer the call.
2
. Press key again to end the call.