Oricom eco5200 Series - Manual (Page 15)

BASIC OPERATION
11
Recall feature Recall feature
Recall feature can be used when you are using some services provided by your
network operators such as “call waiting”, etc. A subscription may apply for these
services, contact your network operator for more information.
While you are talking on the phone, press R key on the base unit or key on
the cordless handset to send a Recall.
Call waiting (Australia only)
You can use the recall function to answer a second call while you are on the phone.
However this service needs to be turned on. For example, to turn on Telstra’s Call
Waiting service:
1
. Press on the base unit or on the cordless handset to wait for dial tone
then press 4 3 # .
2
. You will hear a service tone then press or mentioned above.
Take two different calls at the same time
During a call, you will hear two loud beeps periodically to notify you of another
incoming call. If you wish to answer this call,
1
. Press R key. You will hear a dial tone.
2
. Press 2 to put the current call on hold and talk with the second caller.
3
. Repeat steps 1-2 to swap between the two callers.
Recall settings are: Australia (100ms, SHORT) and New Zealand (600ms LONG).
If this feature does not work correctly, check the country option. To change the Recall
settings, press and hold
/P key on the cordless handset to switch between
“LONG” and “SHORT” on the display.