Cordless handset keypad lock, Registration – Oricom eco5200 Series User Manual

Page 27

Advertising
background image

CORDLESS HANDSET OPERATION

23

Cordless handset keypad lock

Cordless handset keypad lock

During standby mode,

1

. Press and hold

key to lock the keypad.

2

. To release keypad lock, press and hold

key for 3 seconds.

Note

: When the keypad is locked,

key and INT key can be used to answer

an external or intercom call.

Registration

Registration

HANDSET

1

Register new handsets on the eco5200 base

The handsets which come in the same pack are already registered to the base. If you
buy new handsets. You need to register them before use.

1

. Charge the batteries (for 15 hours).

2

. Register the handset (to the base unit).

Each handset can register to four base at a time. Each base can register up to 4
handsets.

During standby mode,

1

. Press

key.

2

. Press

or

key to select

REGISTER” from the display.

3

. Press

key. The display on the right is shown.

4

. Press 1 on the handset to verify base station.

5

. Press

key to confi rm.

6

. Press and hold

key. The base is now in the registration mode.

7

. Press the numeric keys to enter the default PIN (0000).

REGISTER

BS ?

Advertising