Oki 2426 - Manual (Page 42)

42
Storage Device Manager
Open SDM
Double click the local hard drive, then double click Okidata
→ SDM
for Mac
→ Storage Device Manager for Mac
.
From the main screen, you can set the default feed tray as well as
paper sizes for the feed trays. You can also enable (the default) or
disable the Auto Tray Switch feature.
Important!
• When attempting to open the application, ensure that the
default printer is connected and turned on.
• If your default printer is a virtual printer, the application will
return the error message “This utility does not support this
interface.” Reset your default printer to a real printer.
NOTE
Trays that are not installed are grayed out and disabled.
Mac9 1 SDMforMac jpg