Oki 2426 User Manual
Page 6
Advertising
6
Activate Installed Options in the Driver
7. Click
Configure
.
8. Optional Trays: To engage optional trays, change the setting for
Available Tray
to
2
or
3
depending on how many trays you have
installed.
9. Duplex Unit: To engage the Duplex Unit, change the setting to
Installed
.
10. Hard Disk Drive: To engage the hard disk drive, change the
setting to
Installed
.
11. DIMMs: To engage additional memory, set
Memory
Configuration
to the new total value of memory installed
(standard memory + any installed optional DIMM memory).
12. When done, click
OK
.
13. Click
OK
.
14. Close Chooser.
Mac9.1
_Select
Options
.jpg
Advertising