Olicom A400A - Manual (Page 37)

35
2. Interface: Use the dropdown menu to select a number from 1
to 8 (please refer the settings in ATM & VC service mode).
3. Mode: Use the dropdown menu to select the mode.
Options are:
ΠDisable: Select Disable to turn off RIP service for the certain
interface.
ΠEnable: Select Enable to turn on RIP service for the certain
interface.
ΠSilent:
Select Silent for receiving routing information only.
4. Version: Use the dropdown menu to select the version.
RIP-Send/receive specify whether you want the router to send Routing
Information Protocol (RIP) messages to other routers.
Option are:
ΠRIP-1 - Broadcast/Accept routing information in RIP version 1
format.
ΠRIP-2- Multicast/Accept routing information in RIP version 2
format.
5. Type: Use the drop down menu to specify whether the router
accepts administrative commands received over this virtual
circuit.
Options are: NONE, PASSWORD, MD5
6. Code: Enter the password (up to 15 characters) when you
select the type of PASSWORD or MD5 on above step 5.
7. Enable poison reverse: When network topology change,
especially for this router detect some route disappear, this
router will keep routing information from being used for a
period of time and notify its unlimited distance to other
communication servers.
8. Click the OK button to store your modified configuration in
this ADSL router memory. Or click Cancel button to return to
main page.