Onkyo Network A/V Receiver HT-R690 - Manual (Page 15)

15
En
Connect your components to the appropriate jacks. The default input assignments are shown below.
✔: Assignment can be changed ( ➔
page 40).
See also:
• “Connection Tips and Video Signal Path” (
➔ page 76)
• “About HDMI” (
➔
page 78)
• “Using an RIHD-compatible TV, Player, or Recorder” (
➔
page 79)
■
Audio Return Channel (ARC) function
Audio Return Channel (ARC) function enables an HDMI capable TV to send the audio stream to the HDMI OUT of the
AV receiver.
• This function can be used when:
– your TV is ARC capable, and
– the TV/CD input selector is selected, and
– “HDMI Control (RIHD)” is set to “On”(
➔ page 51), and
– “Audio Return Channel” is set to “Auto” ( ➔ page 52).
Tip
• To listen to audio received by the HDMI IN jacks through your TV’s speakers:
– Set the “HDMI Control (RIHD)” setting to “On” (
➔
page 51) for an -compatible TV.
– Set the “Audio TV Out” setting to “On” ( ➔ page 52) when the TV is not compatible with , or the “HDMI Control
(RIHD)” setting to “Off”.
– Set your Blu-ray Disc/DVD player’s HDMI audio output setting to PCM.
– To listen to TV audio through the AV receiver, see “Connecting Your Components” (
➔
page 16).
Note
• When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be seen on the TV
screen (on the TV, select the input of the HDMI component connected to the AV receiver). If the TV power is off or the TV is set to
another input source, this may result in no sound from the AV receiver or the sound may be cut off.
• As the “Audio TV Out” setting is set to “On” (
➔ page 52) to hear from your TV speakers, the sound will also be output from the AV
receiver’s speakers if you adjust the volume of the AV receiver. Similarly, as the “ HDMI Control (RIHD)” setting is set to “ On ”
( ➔ page 51) to hear from the speakers of an -compatible TV, the AV receiver’s speakers will produce sound if you adjust
the volume of the AV receiver, while the TV speakers will be muted. To stop the AV receiver’s speakers from producing sound, you
can either change the settings on the AV receiver or on the TV, or turn down the volume of the AV receiver.
Connecting Components with HDMI
Jack Components Assignable
Input HDMI IN 1 Blu-ray Disc/DVD player
✔
HDMI IN 2 VCR or DVD recorder/Digital Video Recorder
✔
HDMI IN 3 Satellite/cable set-top box, etc.
✔
HDMI IN 4 Game console ✔
Output HDMI OUT TV, projector, etc.
Game console
VCR or DVD recorder/Digital Video Recorder
TV, projector,
etc.
Satellite/cable set-top box, etc.
Blu-ray Disc/DVD player