Omron Healthcare GOSMART HJA-301 - Manual (Page 25)

25
USING THE SYSTEM RESET
FUNCTION
Use the system reset function in the following
cases:
• When you want to reset the initial setup data (weight,
height, clock, etc.)
• When you want to delete all data
TO RESET THE SETUP DATA:
1. Press the SET button on the back of the
unit.
The display screen shows the SETUP section,
starting with a blinking clock.
NOTE:
Do not press the button with a sharp point. This could
cause damage.
2. Reset the settings (refer to page 8).
TO DELETE ALL DATA/ERASE IN MEMORY:
1. Press the SET button on the back of the
unit.
NOTE:
Do not press the button with a sharp point.
This could cause damage.
2. Press and at the same time for at least
2 seconds.
After “ALL Clr” has been displayed, the hour flashes on
the display.
To reset the time, weight, height and stride length, refer to
“Settings” on page 8.