Using the home menu, En-35 – Onkyo TX-NR414 User Manual
Page 35
Turning On & Basic Operations
En-35
The Home menu provides quick access to frequently used
menus.
■
Network Service
`
With this selection, you can use various Internet radio
services or play the contents stored in media connected
to your home network (DLNA) (
. Note
that this selection will be grayed out for a short while
after the AV receiver is turned on. Please wait until it
becomes operable.
Press ENTER to display the “NET” screen. If you
want to use the Internet radio services, use / to
select the desired service. Pressing ENTER again
switches to that selection. If you want to play music
files on a server or to perform remote playback, use
/ to select “DLNA” and then press ENTER.
■
USB
`
With this selection, you can play contents of portable
players (iPod, etc.) and USB storage devices connected
to the AV receiver’s USB port (
Note that this selection will be grayed out for a short
while after the AV receiver is turned on. Please wait
until it becomes operable.
Press ENTER to select a drive or browse the contents
of the media connected, followed by / to select the
desired folder or track. Pressing ENTER as a track is
selected will start playback.
■
InstaPrevue
`
With this selection, you can preview audio/video
streams coming from HDMI inputs previously
assigned to input selectors (except for HDMI IN 6).
Even with multiple components connected through
HDMI, you can easily switch between inputs as their
previews are displayed on a single screen.
Press ENTER to display the main preview (currently
selected HDMI input) and the additional previews
(other HDMI inputs). Use / or
/
to select a
preview thumbnail, and pressing ENTER will switch
the AV receiver to that input source.
■
F/W Update
`
With this selection, you can update the firmware of the
AV receiver. Note that this selection will be grayed out
for a short while after the AV receiver is turned on.
Please wait until it becomes operable.
Press ENTER to start the procedure (
■
Setup
`
With this selection, you can access the common
settings of the on-screen Setup menu.
Press ENTER to display the Setup menu
(
Using the Home Menu
The Home menu appears only on a TV that is
connected to the
HDMI OUT. If your TV is connected
to other video outputs, use the AV receiver’s display
when changing settings.
1
Press
RECEIVER followed by HOME.
The Home menu will be superimposed on the TV
screen.
2
Use / and
ENTER to make the desired selection.
Press HOME to close the menu.
N e t w o r k S e r v i c e
U S B
I n s t a P r e v u e
F / W U p d a t e
S e t u p
H o m e
You need to connect the AV receiver to your home
network (
).
Tip
• If no video signals are present, the thumbnails will be filled in
black.
• You can specify the number of preview thumbnails as well as
their positioning on screen (
Note
• This function cannot be selected when:
– HDMI IN 6 is the current HDMI input source, or
– No signal is present on the current input source.
Tip
• You can also access frequently used settings from Quick
).