Onkyo TX-NR414 - Manual (Page 43)

Advanced Operations
En-43
Menu HDMI Input
If you connect a video component to an HDMI input, you
must assign that input to an input selector. For example, if
you connect your Blu-ray Disc/DVD player to HDMI IN 2,
you must assign “HDMI2” to the “BD/DVD” input
selector.
Here are the default assignments.
■ BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD
` HDMI1, HDMI2, HDMI3, HDMI4, HDMI5,
HDMI6:
Select the input to which the component has been
connected.
` - - - - -:
Select if you’re not using the HDMI OUT.
Each HDMI input cannot be assigned to two input
selectors or more. When HDMI1 - HDMI6 have already
been assigned, you must first set any unused input
selectors to “- - - - -” or you will be unable to assign
HDMI1 - HDMI6 to other input selectors.
Note
• If no video component is connected to HDMI output (even if the
HDMI input is assigned), the AV receiver selects the video
source based on the setting of “Component (Component Video
Input)”.
• When an HDMI IN is assigned to an input selector as explained
here, the same HDMI IN will be set as a priority in the “Digital
Audio” (
➔ page 44 ). In this case, if you want to use the coaxial
or optical audio input, make the appropriate selection in the
“Audio Selector” setting (
➔ page 47 ).
• Do not assign an HDMI IN to the TV/CD selector while “HDMI
Ctrl (RIHD)” is set to “On” ( ➔ page 49 ), otherwise
appropriate CEC (Consumer Electronics Control) operation will
not be guaranteed.
• If you assign “- - - - -” to an input selector that is currently
selected in “HDMI Through” ( ➔ page 49 ), the “HDMI
Through” setting will be automatically switched to “Off”.
Menu Component
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2, you must assign “IN2” to
the “BD/DVD” input selector.
Here are the default assignments.
■ BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD
` IN1, IN2:
Select the input to which the component has been
connected.
` - - - - -:
Select if you’re not using the COMPONENT
VIDEO OUT.
HDMI Input
Input selector Default assignment
BD/DVD HDMI1
CBL/SAT HDMI2
GAME HDMI3
PC HDMI4
AUX - - - - -
TV/CD - - - - -
1 2 3 4 5
“Setup”
Component (Component Video Input)
Input selector Default assignment
BD/DVD IN1
CBL/SAT IN2
GAME - - - - -
PC - - - - -
AUX - - - - -
TV/CD - - - - -
1 2 3 4 5
“Setup”