Olympus DS-2000 - Manual (Page 26)

26
Index Marks
Setting an Index Mark
1 Press the INDEX button during
recording or playback to set an
index mark.
An index mark is set and the index number
appears on the display.
Clearing an Index Mark
1 Play the file with the index mark you want to
clear.
2 Press the FF/+ or REW/– button to choose the
index mark to be cleared.
3 Press the ERASE button while the
index number appears for about 2
seconds on the display.
The index mark is erased.
Index numbers are reassigned automatically.
································································································
Notes
• Up to 16 index marks can be set in a file. Attempting to set more index
marks will cause “INDEX FULL” to appear on the display.
• Index marks cannot be set or cleared in a file stored on a SmartMedia
card with a write-protect seal attached to it (
→
P.7).
• Index marks cannot be set or cleared in a locked file (
→
P.27).
Index marks can be incorporated into a file during recording or playback to make it easy to locate
interesting information. Index marks enable faster access to important information by pressing the
FF/+ or REW/– button.
MENU
INDEX
REC
STOP
ERASE
1
MENU
INDEX
REC
STOP
ERASE
2
1
3
Index Marks