Olympus DS-2000 - Manual (Page 33)

33
Assigning Folder Names
6 Press the FF/+ or REW/– button to
choose characters.
Available characters are 0 to 9, A to Z,
and space.
PLAY button:
To input the selected
character and advance
the input position.
FOLDER button: Acts as a backspace.
ERASE button:
To delete the flashing
character.
INDEX button: Lets you insert one
space.
7 When you have finished setting
the folder name, press the PLAY
button for 1 second or longer.
This completes the folder naming
procedure. (If you wish to enter another
folder name, press the FF/+ or REW/–
button to open the folder name setup
screen and repeat the process starting
from Step 3.)
8 Press the STOP button to close
the menu.
·····································································
Notes
• The folder naming process ends automatically
when the eighth character is set.
• Folder names can be changed only if a SmartMedia
card is inserted.
• A SmartMedia card with a write-protect seal
attached to it cannot be changed.
• When a SmartMedia card is formatted, folder
names that you assigned will be reset to the initial
names.