Olympus DS-2000 - Manual (Page 37)

37
T
raining your PC for V
oice Recognition
Training your PC for Voice Recognition
When you use voice-recognition software such as IBM ViaVoice, it is recommended that you set
the recorder to PC microphone and have the software learn the characteristics of the speaker’s
voice and the recorder’s built-in microphone to maximize the accuracy of voice recognition.
1 Connect the KP-4 PC connection cable
(supplied) to the recorder’s earphone jack and
the PC microphone jack of your PC.
2 Start the software on your PC and prepare it to
receive voice input. (Refer to the User’s manual
of the software for details.)
3 Press and hold the FOLDER button
to get into PC train mode.
The Record/Play indicator lamp lights in
red, and “TRAIN PC” flashes on the
display, while you are holding the FOLDER
button pressed.
4 Speak into the recorder’s microphone.
................................................................................................
Notes
• When the recorder is connected to a PC with USB connection, you
cannot perform these procedures.
• While the recorder is set as PC microphone, the output level of the
earphone jack is fixed.
• Refer to the user's manuals of DSS Player Pro and your voice
recognition software for details.
PC
To the PC’s
microphone jack
INDEX
STOP
FOLDER
/MENU
PLAY
ERASE
Earphone jack