Onkyo DR-645 - Manual (Page 28)

28
En
TV TYPE
` PAL:
Select this when the unit is connected to a PAL TV.
`
AUTO:
Select this when the unit is connected to a Multi TV.
` NTSC:
Select this when the unit is connected to an NTSC
TV.
AUDIO, SUBTITLE, DISC MENU
You can select a preferred language for audio, subtitle and
disc menu.
• When you select a preferred language that is not
recorded on the DVD, one of the recorded languages is
automatically selected.
• You can override the “AUDIO” setting by pressing
AUDIO on the remote control while a DVD disc is
playing.
• You can override the “SUBTITLE” setting by pressing
SUBTITLE on the remote control while a DVD disc is
playing.
• Select “OFF” to turn subtitles off. Note that subtitles on
some discs cannot be removed even when you select
“OFF”.
PARENTAL
Playback of some DVD discs can be limited depending on
the age of the users. The parental control system allows
the playback limitation level to be set by the parent.
Note
• The lower the level, the stricter the limitation.
• If the rating of the loaded DVD disc is higher than the level you
set, the system will require a password. Enter your password and
press ENTER to start playback.
DEFAULT
All the items in the SETUP menu (except for the password
and parental control) will be reset to the default settings.
PASSWORD MODE
You can temporarily unlock discs for playback according
to the level.
To change this setting, select “ON” or “OFF”, enter your
password, and press ENTER.
` ON:
You need a password to change the level of parental
control.
` OFF:
You can change the level of parental control without
a password. You cannot temporarily unlock discs for
playback.
PASSWORD
You can set a new password for parental control.
The default password is 2580.
PREFERENCE
1
Select the desired parental control level from the
menu, then press
ENTER.
2
You will be prompted to enter your password. Use
the number buttons to enter 2580 (or your privacy
password if already established).
• No need to enter a password if “PASSWORD
MODE” is set to “OFF”.
PASSWORD SETUP
1
Select “CHANGE” and press ENTER.
2
Enter 2580 (or your privacy password) using the
number buttons.
3
Enter a new password.
4
Enter the same password again to confirm.
5
Press ENTER.
Note that you will need your password to change the
level of control in the future as well as to temporarily
unlock discs for playback.
If you forget your password, use 2580.