Optima Company 600 - 1700 - Manual (Page 14)

14
Control panel
Menu dial
The menu dial is used to navigate between the menus and to confi rm your
selection. You also determine the values of different settings by using
the dial. If, for example, you turn the menu dial clockwise the value will
increase. Always press the menu dial to confi rm your selection.
Power switch (ON/OFF)
You start and stop the heating installation using the power switch button.
Menu display
The menu display gives you information and several settings options.
You can:
Select different temperatures for heating and hot water (if hot water
heater is fitted).
Select time control settings (different heat at different times).
See alarm causes and receive corrective instructions.
How to use the control panel
Navigate the menus using the menu dial. Turn the menu dial clockwise to
move down through the menus. Turn the menu dial anti-clockwise to move
up through the menus. When the desired row is marked, press the menu
dial to confi rm your selection.
Certain functions have longer names than available space in the menu
window. In such cases, the row switches to show the different parts of
the text. Example: Room temperature setting: First, Room temperature... is
displayed
, this then goes out and ...setting is displayed for a few seconds,
whereupon Room temperature... is displayed again. At the top and bottom
of each sub menu there are back arrows that take you back to the previous
menu. Press the menu dial when these are marked.
Back arrows
Symbol overview
Symbols for different functions and components that are
in operation are displayed in the lower part of the menu
window. Compressor
Hot water mode
Fan
Hot water peak
Additional heat
Extra hot water
Holiday operation Alarm Timer Control Power guard
Heating mode