Optima Company 600 - 1700 - Manual (Page 25)

25
Advanced menu
Alarm log
You can easily see any alarms and warning windows that may have
occurred, see section What to do if a fault occurs. The menu provides
information about the alarm type and when the alarm occurred. If there is
an alarm symbol in the menu window this means the alarm is still active,
and some form of action is required. Select Alarm log in the advanced menu
to access the function.
Access level
The access level is 0 as standard. This level gives you access to all customer
functions within Menu and Advanced menu.
Return to factory settings
If you want to restore the factory settings on the heating installation you can
easily reset all the settings you have made.
Select Return to factory settings. Select Yes and then Save to save the setting
or Cancel to return without saving.
When restoring the factory settings while in any of the customer levels, the
settings made by the installer in the Installer/Service level are not affected
(see Menu levels).
Deactivate alarm buzzer
When an alarm occurs, an alarm window is displayed and a warning signal
sounds. This warning signal is muted if the alarm is acknowledged or if the
alarm cause disappears, see section What to do if a fault occurs.
The function of the warning signal is to alert the user about a triggered
alarm. The function can be deactivated by selecting Deactivate alarm buzzer.
Select Yes and Save to save the change or Cancel to return to the menu
without saving.
Program version
The program version of the control unit is displayed. Keep this information
to hand if you need to contact the installer or dealer.