Olympus VP--1 - Manual (Page 31)

E-31
Projecting a Picture in Picture
This function displays the video image (i.e., the picture of the
VIDEO connector input) on the personal computer screen (i.e.,
the PC connector input screen) as a sub-picture.
Each press of the PIP button advances the screen size of the
sub-picture one step in the sequence of On
→ Off (i.e., the
sub-picture display is off), and then repeats.
Note
* The main picture is termed the Analog RGB, Digital RGB, or YPbPr
input screen, whereas the sub-picture is termed the VIDEO, S-VIDEO,
and YCbCr input screen.
* The sub-picture cannot be displayed when the main screen receives
the image from the VIDEO connector.
* The sub-picture cannot be displayed when picture in picture is set
to off.
* To change the display position of the sub-picture, see “Picture in
Picture” on Page E-54 .
Sub-picture
Main-picture
ON OFF
FREEZE MUTE PIP
DIGITAL RGB YPbPr
VIDEO S-VIDEO YCbCr
QUICK ASPECT AUTO
POWER
General Operation
Freezing a Moving Picture
This function is used to stop and view a moving picture. Note that
the input image continues to advance even though the picture
there is a still picture condition.
To change the screen to a still image, press the FREEZE but-
ton. Press the button again to return to the moving picture.
Note
During a picture in picture display, both the main picture and the sub-
picture become still pictures.
ON OFF
FREEZE MUTE PIP
DIGITAL RGB YPbPr
VIDEO S-VIDEO YCbCr
QUICK ASPECT AUTO
POWER
Suspending Video and Audio Temporarily
This function is used to cancel the video and audio at the same
time.
Press the MUTE button to cancel the video and the audio.
A further press brings a return to the original condition.
ON OFF
FREEZE MUTE PIP
DIGITAL RGB YPbPr
VIDEO S-VIDEO YCbCr
POWER