Onkyo TX-SR303 - Manual (Page 45)

45
Adjusting the Listening Modes
These functions only work with speaker set A.
Audio Adjust provides various functions for adjusting
the sound.
The Audio Adjust functions are explained below.
Input Channel Settings
■ Multiplex
This setting determines which channel is output from a
stereo multiplex source. Use it to select audio channels
or languages with multiplex sources, multilingual TV
broadcasts, and so on.
Main: The main channel is output (default).
Sub: The sub channel is output.
M/S: Both the main and sub channels are output.
■ Mono (2ch)
This setting determines which channel is output when
the Mono listening mode is used with a stereo source.
L+R: Both the left and right channels are output
(default).
L: Only the left channel is output.
R: Only the right channel is output.
Using the Audio Adjust Functions
1 Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
2 Use the Up and Down [ ]/[ ]
buttons to select “4. Audio
Adjust,” and then press the
[ENTER] button.
MUTING
MENU TOP MENU
SP A / B
SETUP RETURN
RANDOM SUBTITLE
PLAY MODE
AUDIO REPEAT
RC- 605S
--/---
TAPE/AMP
ON STANDBY
DIMMER SLEEP
INPUT SELECTOR
REMOTE MODE
V 1 V 2 V 3
C D TAPE TUNER
DVD MULTI CH
LISTENING MODE
DISPLAY
TEST TONE CH SEL
SURROUND STEREO
CINE FLTR
LEVEL+ LEVEL-
L NIGHT
VOL
CDR
MD
DVD RECEIVER
C D
+10 0 CLR
1 2 3
4 5 6
7 8 9
ENTER
CH
DISC
SETUP
RECEIVER
L NIGHT
CINE FLTR
ENTER
3 Use the Left and Right [ ]/[ ]
buttons to change the settings.
Press the Down [ ] button to
select the next setting.
4 Repeat step 3 to complete all set-
tings.
5 Press the [SETUP] button.
Setup closes.