Rear panel, Front & rear panels —continued – Onkyo TX-SR303 User Manual
Page 8
8
Front & Rear Panels—Continued
A
DIGITAL IN OPTICAL & COAXIAL
These optical and coaxial jacks can be used to con-
nect a CD or DVD player and other components
with digital audio outputs.
B
AM ANTENNA
These push terminals are for connecting an AM
antenna.
C
FM ANTENNA
This jack is for connecting an FM antenna.
D
MONITOR OUT
The composite video output should be connected to
a video input on your TV or projector.
E
FRONT SPEAKERS B
These push terminals are for connecting speaker
set B.
F
FRONT SPEAKERS A, SURROUND
SPEAKERS & CENTER SPEAKER
These push terminals are for connecting speaker
set A.
G
This
(Remote Interactive) jack can be con-
nected to the
jack on another Onkyo compo-
nent. The AV receiver’s remote controller can then
be used to control that component. To use
, you
must make an analog audio connection (RCA)
between the AV receiver and the other component,
even if they are connected digitally.
Note:
can only be used with Onkyo components.
H
CD IN
These analog inputs can be used to connect a CD
player with analog outputs.
I
TAPE IN/OUT
These analog inputs and outputs can be used to con-
nect a cassette recorder, MiniDisc recorder, or other
recorder with analog inputs and outputs.
J
VIDEO 1 IN/OUT, VIDEO 2 IN & VIDEO 3 IN
The VIDEO 1, composite video, and audio inputs
and outputs can be used to connect a VCR. The
VIDEO 2 and VIDEO 3, composite video, and
audio inputs can be used to connect another video
source (e.g., cable TV, satellite TV, or a set-top
box).
K
DVD IN/MULTI CH INPUT
The FRONT, SURROUND, CENTER, and SUB-
WOOFER jacks can be used to connect a compo-
nent with an analog multichannel audio output, such
as a DVD player with a 5.1-channel analog output.
The composite video input should be connected to a
video output on the DVD player.
L
SUBWOOFER PRE OUT
A powered subwoofer can be connected here.
Rear Panel
7
8 9
J
1
B
3
4
5
6
K
L