Oregon Scientific FSP-301 - Manual (Page 14)

14
EN
TEMPERATURE
With the press of a button, you can check the current
indoor or outdoor temperature, trend, and record
measurements. Outdoor measurements are collected
by the remote unit.
VIEW MIN / MAX / CURRENT MEASUREMENTS
Press MEMORY.
CLEAR MIN / MAX MEASUREMENTS
Press and hold MEMORY for 2 seconds until a beep
sounds.
SELECT REMOTE UNIT CHANNEL
Press CHANNEL to switch between
CHANNEL
1, 2, 3, or indoor. Or, press and hold for 2 seconds to
enter auto scan mode. If you select “Auto”, the
channel will change every 3 seconds. Press
CHANNEL or MEMORY again to deactivate this auto
function.
SENSOR SEARCHING
Press CHANNEL and MEMORY to manually activate
channel searching. The search icon will blink until
the remote signal is found, or the search period times
out.