Oregon Scientific FSP-301 - Manual (Page 8)

8
EN
GETTING STARTED
BATTERIES
Batteries for the remote and main units are supplied
with this product. Replace them whenever the low
battery signal (
) displays. The battery door is
located on the bottom of the main unit. Use a small
Phillips screwdriver to remove the remote unit
compartment lid. Be sure to match the correct
polarity, as shown in the battery compartment. After
you change the batteries, press the RESET button
with the point of a blunt object (such as a ball point
pen).
NOTE Insert the batteries in the remote unit before
you set up the main unit. Do not use rechargeable
batteries.
AC POWER ADAPTER
An AC power adapter is supplied for use with this
product. You must connect the power adapter if you
wish to use the continuous projection feature. The
jack is located next to the battery compartment.
NOTE If the AC power becomes unavailable, the unit
will automatically switch to battery power.