Oki 1220n - Manual (Page 104)

ES 1220n Menu Functions • 104
WAIT TIMOUT 5 to 300 SEC
Default = 40
seconds Specifies how many seconds the printer
will wait when received data pauses
before forcing a page eject. In Postscript
emulation mode the job will be cancelled
if timeout occurs.
LOW TONER CONTINUE
STOP Specifies whether the printer should
continue printing after a low toner
condition is detected. If you change this to
STOP, when low toner is detected, the
printer goes off line.
JAM
RECOVERY
ON
OFF Specifies whether the printer should
perform jam recovery after a paper jam
has occurred. If ON, the printer will
attempt to print again any pages lost due
to a paper jam once the jam has been
cleared.
ERROR
REPORT
ON
OFF Change this to ON, if you wish the printer
to print the error details when a Postscript
emulation error occurs.
LANGUAGE English
German
French
Italian
Spanish
Swedish
Norwegian
Danish
Dutch
Turkish
Portuguese
Polish Sets the language used for the display
window and printed reports.
System Configuration Menu (continued)
Note: Factory default settings are shown in bold.
Items Settings Explanation