Oregon Scientific High Precision Body Weight Monitor with Body Fat Index GA 101 - Manual (Page 12)

GB
12
TAKING MEASUREMENTS AS A GUEST USER
Diagram Instruction
TAKING WEIGHT-ONLY MEASUREMENTS
The Body Weight Monitor is equipped with a patented STEP-ON mechanism to help you
take Body Weight measurement without switching on the Monitor. You do not need to wait
for measurements like the majority of scales in the market.
To measure your body weight only, just step on the Monitor then step off after your body
weight is shown. Alternatively, you can tap on your User Setting Switch, then step on the
Monitor after "0.0" is shown on the display. Remain on the Monitor until your body weight
is shown. After a moment, your BMI will also be calculated.
1. For users without stored settings, simply step
on the Monitor while the LCD screen is blank.
If “ ” is shown, the Monitor is unstable
while measuring your weight. Make sure to
remain still and place the Monitor on a flat
surface. Use the carpet feet if the ground is
uneven. Step off the Monitor and follow the
instructions from the beginning.
If “ ” is shown, you have stepped on
the Monitor too early. Step off the Monitor and
follow the instructions from the beginning.
2. Stand still while the measurement is being
taken. The Monitor will beep and the Male
icon will flash.
If “ ” is shown, the maximum loading
capacity for the Monitor has been exceeded.
Step off the Monitor and try again with less
than 150kg of weight.
3. Step off the Monitor and select your gender:
3.1 Press + or - to toggle between genders.
3.2 Press
to confirm.
4. Enter your current age:
4.1 Press + or - to adjust the value.
4.2 Press
to confirm.
5. Enter your height :
5.1 Press + or - to adjust the value.
5.2 Press
to confirm.
To enter your height in feet and inches,
switch the Monitor to “lb” or “st-lb”.
6. Your weight, BMI, and Body Fat Index are
then displayed.
NOTE
NOTE
NOTE
NOTE